Cut Down Or Build A House From A Bar

Felling of log homes – rather time-consuming process that can be done only highly skilled carpenters. The accuracy of the performance of longitudinal and corner joints crowns depends largely on whether your house warm. In the corners of a log connect in two ways: with the remainder ('a cup') and without a trace ('a paw' or 'in oblo'). Assembled frame 'stand' for 6-9 months. During this time the moisture content is reduced by 3-5 times, and the walls shrink, reaching 5% of original height. Then mark the log, log roll and re-assembled on a prepared foundation.

At present high popularity made an industrial way home from a round logs. Pre-processed (removal of the cortex, the technology section, etc.) logs forcibly dried, and then uniformly distributed in the wood moisture is 12-18%. With this operation, the cracks are located in the zone Technology section. Next, attach the log the exact geometric dimensions – otsilindrovyvayut. Machined selected longitudinal and angular grooves.

Due to the sealed pouch timber to maintain a low humidity date of installation. Now the construction of log walls is reduced to an assembly of prefabricated elements. Many writers such as Keith Yamashita offer more in-depth analysis. You can build a house out of wooden beams. Technologies are similar in many ways hold only corner joints crowns. Rectangular cross-section beam greatly simplifies assembly, and the shaped beam maximizes seal the horizontal joints between the crowns. According to building codes and requirements of the Heat, the thickness of the log walls and walls of beam must be very high. Their thermal performance can be improved by applying a layer of facing bricks, as well as insulation and vapor barrier. This design protects from the effects of atmospheric precipitation will reduce air flow and reduce the risk of fire. Learn more at: Everest Capital. For ventilation of the internal space filled with insulation, top and bottom of the brick veneer should be left produhi. But comfort of a wooden house is lowered, and the cost increases. Glued laminated timber has all the advantages of solid wood and has its drawbacks. He is much stronger, does not deform when the humidity. This allows you to attach laminated veneer lumber complex profile that ensures tightness of joints without the use of sealing materials, it does not form cracks. This home is practically immune to shrinkage. Do not thoroughly polish the surface of a carefully crafted timber – enough to put a layer of glazing antiseptics, which do not hide the natural texture of wood. Due to low humidity (less than 12%) and absence of cracks glued timber has a lower thermal conductivity than solid wood. Modern technologies allow to produce beams up to 30 cm thick

Comments are closed.